Chemical Product Catalog

Liquid bisphenol-A epoxy resin EEW 182-192 g/eq for high performance protective coatings flooring systems and adhesives. Low viscosity grade for easy formulation. Complies with food contact regulations FDA 175.300. Available in 20kg and 200kg containers.

Medium oil alkyd resin 55 percent oil length for air-drying industrial maintenance and decorative paints. Good compatibility with driers and pigments. Low VOC formulation available. Supplied in 200kg drums or 1000kg IBC.

High purity technical toluene for solvent applications coatings production and chemical synthesis. Low water and non-volatile residue content. Available in 200L drums 1000L IBC and bulk tanker quantities with competitive European pricing.

Mixed xylene isomers for use as solvent in coatings lacquers and chemical processing. Produced from catalytic reforming with consistent composition. Low sulfur content below 1 ppm. Available in bulk quantities from Hamburg terminal.

Styrene monomer for polystyrene ABS and SBR rubber production. Inhibited with 10-20 ppm TBC for storage stability. Polymerization inhibitor content verified analytically. Full chain custody documentation available for regulatory compliance.

United States Pharmacopeia and European Pharmacopeia grade propylene glycol for pharmaceutical cosmetic food and industrial applications. Produced by hydrolysis of propylene oxide. Very low acetaldehyde content for sensitive applications.

Liquid polyaluminium chloride 30 percent Al2O3 for drinking water and wastewater treatment. Basicity 75-85 percent for optimal flocculation over wide pH range. Meets NSF/ANSI 60 for potable water application. Supplied in 1000L IBC containers.

C5 aliphatic hydrocarbon resin for pressure sensitive adhesives hot melt formulations and rubber compounding. Softening point 99-105 degrees C with excellent tackification and compatibility with EVA SIS SBS and natural rubber.

Coal-based granular activated carbon for air and water purification. High surface area >1000 m2/g.

High purity ethanol suitable for analytical, pharmaceutical, and industrial applications. Meets ACS specifications.

Agricultural grade ammonium sulfate with 21 percent nitrogen and 24 percent sulfur content. Suitable for all crops especially on alkaline soils. Granular form with controlled particle size for uniform spreading. Certified by Turkish Standards Institute.

Light burned magnesium oxide for refractory rubber and chemical applications. Surface area and reactivity controlled for specific end-use requirements. Available in multiple grades from dead burned to caustic calcined with different activity levels.

Technical grade anhydrous sodium sulfate for glass detergent paper and textile industries.

High-purity DMSO used as solvent in pharmaceutical synthesis cryopreservation and topical drugs.

Technical grade acetone for industrial cleaning, thinning, and chemical manufacturing processes.

High purity isopropanol (IPA) for electronics cleaning, pharmaceutical manufacturing, and cosmetics.

High purity isopropyl alcohol suitable for pharmaceutical manufacturing electronics cleaning and laboratory use. Meets ACS and USP specifications with consistent batch-to-batch quality. Supplied in 200L drums and IBC containers with full CoA and SDS documentation.

Industrial grade acetic anhydride for cellulose acetate production aspirin synthesis and chemical intermediate manufacturing. Handled and shipped under strict IATA/ADR regulations with 24-hour emergency response support.

Anhydrous calcium chloride for desiccation dust control concrete acceleration and refrigeration brine systems. Supplied as prills or powder with moisture content below 0.5 percent. Food and pharmaceutical grades available on request.

Industrial grade potassium hydroxide for electrolyte production soap manufacturing and chemical synthesis. Available as flakes pellets or 45 percent solution. Low chloride and sulfate content grades for battery applications.

Technical and reagent grade oxalic acid for metal treatment textile bleaching and chemical synthesis. Available as anhydrous or dihydrate form. Low metal content grades for laboratory applications. Manufactured under ISO 9001 quality system.

Premium hydraulic oil ISO VG 46 with zinc-free additive technology for environmentally sensitive hydraulic systems. Excellent anti-wear oxidation stability and rust protection. FZG gear test pass 12 minimum. Suitable for vane piston and gear pump systems.

Extreme pressure gear oil ISO VG 220 for enclosed industrial gear drives operating under heavy shock load conditions. Contains sulfur-phosphorus EP additive package with excellent thermal stability and foam suppression. Available in 20L and 200L containers.

Semi-synthetic metalworking fluid for machining ferrous and non-ferrous metals providing excellent cooling and lubrication. Biostable formula with long sump life. Free from chlorinated paraffins formaldehyde donors and boric acid.